Yes, light lubrication is recommended for the YIKONG YK4107 RC Car Parts 11T Driving Gear (Part No. 21035), but don’t apply too much. During installation or routine maintenance,…
In my experience, regular maintenance makes a big difference. After every run with the YIKONG YK4107 RC Car, especially in sand or mud, I clean the area around…
Replacing the C Hub Set (Part No. 21002) on the YIKONG YK4107 RC Car is fairly straightforward. First, remove the original C hubs from both sides of the…
If the gears feel too tight after installing the Rear Portal Housing on your YIKONG YK4107 RC Car, don’t assume there’s a problem with the parts right away.…
If your YIKONG YK4083/V3 RC Car Wheels (Part No. 14150) have factory-glued tires, the easiest way to separate the tire from the wheel is by heating the glue.…
YIKONG YK4083/V3 RC Car Parts Rear Wheel Axles (Part No. 13150) In general, they don’t require oiling, but light lubrication can be applied if needed. When installing the…
I’d start by checking the simple things first. Make sure the connector on the YIKONG 17g Shift Servo (Part No. 13119) is plugged in securely and that the…
The YIKONG YK4103 RC Car Parts Shims (no.13069) are thin spacers used to adjust the clearance between components. They are typically installed in locations such as gears and…
No. The YIKONG YK4102 RC Car Parts Aluminum Hex Nuts 13057 only need to be tightened until they are secure. Overtightening is not recommended, as it may damage…