Removing and installing the YIKONG YK4107 RC Car Parts Hexagon Wheel Seat / Wheel Adapter / Hex Hub is fairly straightforward. First, remove the wheel nut and take off the wheel. Then slide the Hex Hub off the axle. If it is tight, gently wiggle it while pulling instead of forcing it to avoid damaging the axle or bearings.
To install, align the YIKONG YK4107 RC Car Parts Hexagon Wheel Seat / Wheel Adapter / Hex Hub with the axle pin (if equipped) and press it fully into place. Reinstall the wheel and tighten the wheel nut securely. After installation, spin the wheel by hand to make sure it rotates smoothly and check that the hex hub is firmly seated before driving.
